Sun Microsystems StorEdge 6920 System Getting Started Manual Download Page 89

Page: 89 / 144

Chapter 3

Configuring the System

The system displays the Add Storage wizard.

6. Complete the wizard steps as instructed.

For more information about adding storage to a pool, go to the online help system
by clicking the Help button. Click the Search tab and type

add storage.

Creating a Storage Domain

1. Log in to the system as a storage administrator from the Sun Web Console login

page:

user name:

storage

password:

!storage

2. Click SE6920 Configuration Service.

The system displays the Volume Summary page.

3. Click Storage > Domains.

The system displays the Storage Domain Summary page.

4. Click New.

The system displays the New Storage Domain wizard.

5. Complete the wizard steps as instructed.

For more information about creating a storage domain, go to the online help system
by clicking the Help button. Click the Search tab and type

create a storage

domain.

Creating a Storage Profile

1. Log in to the system as a storage administrator from the Sun Web Console login

page:

user name:

storage

password:

!storage

2. Click SE6920 Configuration Service.

The system displays the Volume Summary page.

3. Click Storage > Profiles.

The system displays the Storage Profile Summary page.

4. Click New.

The system displays the New Storage Profile wizard.

Summary of Contents for StorEdge 6920 System

















































































































































Search results

Summary of Contents for StorEdge 6920 System

Reviews:

Related manuals for StorEdge 6920 System

Brands by name

Popular brands

Sun Microsystems StorEdge 6920 System, Getting Started Manual

Search results

Summary of Contents for StorEdge 6920 System

Reviews:

Related manuals for StorEdge 6920 System

Brands by name

Popular brands