Sun Microsystems StorEdge 6920 System, Getting Started Manual

Page: 140 / 144

122 Sun StorEdge 6920 System Getting Started Guide • May 2004
LUN mapping 69
M
MAC addresses 56
management console 33
management interface cards (MICs)
location of 2
port for 4
management software 8
mechanical modifications 101
Microsoft Windows operating environments
flash disk and 28
supported software for 9
mirroring, software for 10
modem ports, in service panel 4
monitoring and diagnostic software 8
factory configuration of 54
monitoring, remote. See remote monitoring
multipathing 9
multiple systems
maximum number of 41
shared phone line for 77
Storage Service Processor ID and 40
N
navigational tabs 51
network addresses 109
network configuration, settings for 41
Network Storage Command Center (NSCC)
notification provider 55
network terminal concentrator (NTC) 4
logging in to 39, 90
network traffic, internal 4
networks, types of 6
New Volume wizard 68
notification
local, configuring 54
remote, configuring 55
NSCC. See Network Storage Command Center
NTP server, specifying the IP address of 53
O
online help, accessing 52
operating environment requirements 104
P
pager notification address, specifying 54
partial remote shutdown 91
restoring the system after 96
performance characteristics 60
performance requirements 65
PHONE jack 30
physical storage elements 57
power cables
connecting 24, 26, 84, 86
connecting to power sequencers 25, 85
field-replaceable units (FRUs) and 87
part numbers for 80, 107
physical specifications of 102
power connections 4
power drops, configuring 12
power sequencers
in accessory kit 105
cabling 25, 85
electrical specifications for 103
location of 2, 82
power status indicators 27
power supplies
battery backup 5
redundant 5
power-on sequence 87
after full remote power-off 93, 97
after partial remote power-off 96
local 23
overview of 22
for remote power management 87
pre-installation tasks 12
product specifications 101
Q
quick status displays 50