Sun Microsystems StorEdge 6920 System, Getting Started Manual

Page: 72 / 144

54 Sun StorEdge 6920 System Getting Started Guide • May 2004
Setting Site Information for Diagnostics and
Monitoring
The monitoring and diagnostics software is configured at the factory to recognize the
hardware configuration of the system, but not specific information about your site.
Before using the system, you should specify basic site and email notification
information.
1. As the
admin
user, go to the Sun Web Console page and click Storage Automated
Diagnostic Environment.
The system displays the Current Alarms page.
2. To provide specific information about your site:
a. Click Administration > General Maintenance > Site Information.
The system displays the Site Information page.
b. Fill in all mandatory Site Information entries as denoted by red asterisks.
For more information, click the Help button on the Site Information page.
c. Click Submit.
3. To provide local email settings:
a. Click Administration > Notification > Local Email.
The system displays the Local Email page.
a. Click Add Email to add a new Email or pager notification address.
b. Enter each email or pager notification address you want to add.
For information on the parameters on the Add Email page, click the Help button
on that page.
4. To test the local email functionality:
a. Click Administration > Notification > Test Email.
The system displays the Test Email page.
b. Type the email address you want to test in the Email Address text box.
c. Type a brief comment in the Message text box.
If you leave the Message text box blank, the test email contains a default message
with the words “Test Message” in the subject line. If you place a carriage return in
the Message field, you cannot enter text. To restart, click in the Message text box
and enter text.
d. Click Submit.