Sun Microsystems StorEdge 6920 System, Getting Started Manual

Page: 113 / 144

Appendix B Remote and Local Power Management 95
5. Click OK to confirm the full system shutdown.
FIGURE B-13
General Settings Page: Confirm Full Shutdown
6. At the bottom front and bottom back of the base cabinet, press the AC power
sequencer circuit breakers to Off.
FIGURE B-14
AC Power Sequencer Control Panel: Power Off
7. At the bottom front and bottom back of the expansion cabinet (if applicable),
press the AC power sequencer circuit breakers to Off.
The system is now completely shut down. Refer to “Performing a Full System
Shutdown” on page 93 for the state of each system component.
SWITCHED OUTLET CONTROL
M
A
I
N
P
O
W
E
R
POWER AVAILABLE
SWITCHED OUTLETS
LOCAL
REMOTE
J15
OUT
OFF
J14
IN
AC power sequencer
circuit breaker
Power Off
Local/Remote switch
in Remote position