Chapter 5
Software and Operating Environment Installation
63
10. Install the appropriate patches.
Refer to the Release Notes accompanying the CD.
11. Install the required PCI drivers and, if desired, SunVTS.
Refer to the Release Notes accompanying the CD.
5.1
Finishing Installation
Finishing installation includes:
■
Appending the path to the Netra ft 1800 CMS utilities to the
PATH
variable;
■
Setting the
MANPATH
environment variable to include path to the man pages
shipped with the Netra ft 1800 software.
5.1.1
Setting up Access to
Netra ft 1800 CMS Utilities
To allow access to Netra ft 1800 CMS utilities, append the following path to your
PATH
variable in your shell start-up file.
For a C-shell, in your
$HOME/.cshrc
file type:
For a Bourne or Korn shell, in your
$HOME/.profile
file type:
5.1.2
Setting the
MANPATH
Variable
To obtain access to the Netra ft 1800 man pages, you must assign or append
/opt/SUNWsms/mfs/lib
to the
MANPATH
environment variable.
setenv PATH ${PATH}:
/usr/platform/SUNW,Ultra-4FT/SUNWcms/sbin
PATH=${PATH}:
/usr/platform/SUNW,Ultra-4FT/SUNWcms/sbin
:
export PATH
Summary of Contents for Netra ft 1800
