Sun Microsystems Enterprise Tape Library 7/3500, Field Service Manual

Page: 216 / 242

186 Sun Enterprise Tape Library 7/3500 Field Service Manual • July 1997
-none-
OR
5
30
30
03
03
CLEANING CARTRIDGE INSTALLED
Indicates that the element contains a
cleaning cartridge that is not “used-up.” This
is returned with the element status data,
which has no sense key.
OR
CLEANING CARTRIDGE INSTALLED
A cleaning cartridge cannot be removed
from a drive because it is being used in a
cleaning operation.
A cartridge cannot be placed into the drive
because the drive is being cleaned.
A cartridge cannot be placed into an empty
storage element because it is reserved for a
cleaning cartridge that is currently in use in
a drive cleaning operation.
SCSI
Both
5 39 00 SAVING PARAMETERS NOT SUPPORTED
Verify Save Parameter field in the Mode
Sense command complies with the command
format described in the Sun ETL 7/3500
Software Interface Guide.
SCSI
5 3A 00 MEDIUM NOT PRESENT
The inventory indicated that a cartridge was
in this bin but no cartridge was sensed by
the gripper when it attempted to pick it.
Retry the command. Check for proper
seating of the cartridge.
It may also indicate that the tape is not ready
to be picked from the drive because the tape
is not fully unloaded. Retry the command. If
the problem persists, check the function of
the tape drive handle assembly. Manually
unload the tape.
Both
TABLE B-1
Sense Data Values (Hexadecimal) (Continued)
Sense
Key
ASC ASCQ Message Name/Description Interface