Sun Microsystems Enterprise Tape Library 7/3500, Field Service Manual

Page: 206 / 242

176 Sun Enterprise Tape Library 7/3500 Field Service Manual • July 1997
▼
To Exercise Library Elements
● Press the Exercise Library button in the Operator screen.
An “In Progress” dialog box is displayed.
The exercise process runs continuously until you stop the process by pressing the ABORT
button. The exercise process is also stopped if an error is detected.
Unload Drives
This command prepares a tape cartridge to be ejected from a drive by disengaging the tape
from the read/write heads and rewinding it. After unloading the drive, you can eject and
remove the tape cartridge using the Move Cartridge command described earlier in this
chapter.
▼
To Unload a Drive
1. In the Operator screen, press the Unload Drive button.
The Unload Drive screen is displayed (Figure A-11).
FIGURE A-11
Unload Drives Screen
2. Use the Left and Right Arrow buttons to select the desired tape drive.
Drive 0
Drive 1
Drive 2
Drive 3
S
Load Port
Stop
Standby
Home
Back Forward
System
Offline
Tapes Overview Operator Service Operator
Control: Unload Drive
Execute
Drive:
_