Sun Microsystems Blade X6275 M2, Service Manual

Page: 70 / 136

Legend Name Color Activity
1 Locate LED White Blinks when activated in ILOM by user.
2 Ready to Remove LED Blue On solid when it is OK to remove.
3 Service Action Required
(Fault) LED Amber On solid when the system has a fault
status.
4 Power/OK LED Green
■ SP booting: Fast blink when SP is
booting
■
Standby power mode: Slow blink
■ Full power mode: on solid (does not
blink)
5 Power button None Used to power the server module.
6 NMI button None For Service use only.
7 Universal Connector
Port (UCP) None Connection for the multi-port cable.
See Also :
■
“POST Code LEDs” on page 70
■
“DIMM Fault LEDs” on page 72
■
“CPU Fault LEDs” on page 74
■
“FMod Power Status LEDs” on page 76
POST Code LEDs
Two pairs of LEDs inside the front panel of your server (one pair for each node) display a set of
two-digit hexadecimal POST codes. You can use these LEDs to discern the status of the server
and diagnose server- and node-related issues. To view the LEDs, you need to look through the
front panel and into the server module at the locations shown in the following illustration.
The illustration and table below show the location and describe the function of the Post Code
LEDs.
POST Code LEDs
Sun Blade X6275 M2 Server Module Service Manual • March, 2013 70