Sun Microsystems Blade X6275 M2, Service Manual

Page: 33 / 136

Caution –
Possible system and component over-temperature warnings, shutdown, and
heat-related damage. Do not operate the system with empty slots. Always insert a server module
filler panel into an empty slot within 60 seconds to reduce the possibility of server module
shutdown.
Set the server module on an antistatic mat in a location with ample space and light.
“How to Remove the Server Module Top Cover” on page 33
▼
How to Remove the Server Module Top Cover
See “How to Remove the Server Module from the Chassis” on page 31 .
Remove the server module chassis. See “How to Remove the Server Module from the Chassis”on
page 31 .
Press down on the server module cover release button and, using the indent for leverage, slide
the main cover toward the rear of the server module chassis approximately 0.5 inch (12 mm).
Lift the cover straight up from the server module chassis.
“Component Removal and Installation Procedures” on page 37
7
Next Steps
Before You Begin
1
2
3
Next Steps
Using the Locate LED to Find the Server Module (Optional)
33