SUN EAST PEAK-350
电脑波峰焊用户手册
53 -74
Items
Maintenance
Conveyor
System
Supplement the chain bearings with engine oil of high temperature.
Replace the chain fingers and force limiter of conveyor chain with new ones.
Adjust the width of lead rail.
Adjust the angle of lead rail.
Flux Sprayer
Adjust the compositions of flux and control the density of flux.
Clean the filter device.
Clean the nozzle.
Solder Pot
Replace the heat pipe with new ones.
Replace the solder.
Adjust the nozzle.
Clean up the oxide.
Finger Cleaner Take good care of clean brush.
Item
Conveyor System
Maintenance
Supplement the chain bearings with engine oil of high temperature.
Maintenance Steps
(1)
Loosen the fixed screw of chain by open-end wrench and open the conveyor chain
cover.
(2)
Make the conveyor chain running at a speed of 0.5~1.8m/min.
(3)
Embrocate the engine oil evenly on the arc plate of chain by brush.
