SUN EAST PEAK-350
电脑波峰焊用户手册
43 -74
The system allows the operator setting up the time for opening and closing the machine at
most 3 times per day. At first, set up the date in a week; and then choose the timers, and finally
fill in the time in the blank for opening and closing the machine. Time mode is as per 24 hours a
day, such as 12:00, 5:00, or 17:00.
Setup Procedure
1
．
Choose the date, that is, choose the date of opening and closing the machine.
2
．
Choose the times (at most 3 times) of opening and closing the machine in the timer zone
by pressing on
“
V
”
.
3
．
Set up the beginning and ending time for opening and closing the machine automatically.
Time format is on basis of 24 hours, for example, 6
：
00 /12
：
00 /23
：
00 etc.
4
．
Don
’
t make the setup time overlapped, and make sure the latter setup time is after the
former setup time.
5
．
Press
“
Save
”
button to save the setup time of opening and closing the machine.
6
．
Press
“
Enter
”
button, and then the system will run under the current parameter.
7
．
When the showing time of the machine is different with the local standard time, please calibrate the
showing time by only pressing
“
in-phase
”
. in general, the we don
’
t use the operation.
Press
“
Cancel
”
button, and then the system will run under the former setup time.
4.3.6 Temperature Compensatory Setup
