SUN EAST PEAK-350
电脑波峰焊用户手册
41 -74
4.3.2:
Parameter Setup of Machine
It is used to set up the machine parameters through this window.
Sway Motor
It can make the first wave with sway function for soldering reliability. Set up the run speed
as required and press
“
Enter
”
button once for finalizing the parameter setup.
Spray Motor
It is the motor for controlling the height of first wave. Set up the run speed as required and
press
“
Enter
”
button for finalizing the parameter setup.
Wave Motor
It can make the second wave with sway function. Set up the run speed as required and press
“
Enter
”
button for finalizing the parameter setup
.
Conveyor Speed
Set up the conveyance speed for PCB on basis of soldering quality as required. It is
adjustable within the scope of 500-1800 mm/min.
Preheat Zone 1:
Set up its temperature value as required.
Preheat Zone 2:
Set up its temperature value as required.
Preheat Zone 3:
Set up its temperature value as required.
Temperature in Solder Pot:
Set up its temperature value for the solder pot.
Cancel:
Press
“
Cancel
”
button and the system will run under the former parameters.
