SUN EAST PEAK-350
电脑波峰焊用户手册
50 -74
3
．
Press
“
ON
”
button on Solder Pot, and the solid solder in the solder pot will be melt by heating.
4
．
Go to the next step after the temperature of solder pot reaches to the setup value and
be sure that all solid solder have melted into liquid one.
5
．
Adjust the width and angle of lead rail as required.
6
．
Press
“
ON
”
button of Sprayer Motor and Wave Motor if necessary.
7
．
Press
“
ON
”
button of Lightening if necessary.
8
．
Be sure that the preheating temperature, conveying speed, temperature of solder pot,
height of wave, inclining angle, spraying speed etc. can meet the needs of soldering
techniques.
9
．
Start soldering the PCB and the wave is under economic mode.
10
．
Switch off all relevant parts after completion of soldering.
11
．
Save the parameters if necessary.
