SUN EAST PEAK-350
电脑波峰焊用户手册
20 -74
Revolve the Handle 2 for changing the angle of lead rail in accordance with the above picture. In general,
the angle of 5
°
is appropriate between the horizontal line and lead rail.
3.3.2. Conveyor rail adjustment
Adjust the handwheels for changing the width between the conveyor rail in accordance with the picture tested
by PCB. The width range is 50-350mm. The conveyor rail width should be 0.5mm wider than that of
PCB, and can move the PCB smoothly.
