SUN EAST PEAK-350
电脑波峰焊用户手册
31 -74
This tool can make the temperature profile printed. The user can test 3 points of same PCB so as to
analyze the failure reasons and check the soldering techniques.
* PCB
Set up the PCB size and economical performance parameter, such as the spray length in
advance, the spray length postponed, the soldering length in advance and the soldering
length postponed.
* Parameter Setup
Set up the performance parameter of machine, such as conveyor speed of motor, wave
height, preheating temperature, temperature of solder pot etc.
Upper Limit and Lower Limit
Set up the preheating temperature and the warning temperature of solder pot if its
temperature is too high or too low.
Time Setup
The system allows setting up the time for opening and closing the machine by standard
format for 5 times per day in every week.
PV Parameter
Display the system status on run, and show the actual temperature and speed etc timely. The
user can view the machine performance through this window.
Temperature Profile
The user can work out the temperature profile with soldering time tested at 3 points.
Initialization
The user can initialize the servo spray system by this tool when there appears the failure of
servo spray system by accident or the servo spray system is put to use for the first time.
* Reset
The system will stop the relevant parts if there is failure with them. The user cannot
re-operate the machine until he push
“
Reset
”
button after confirming the failure.
About
It can show the machine information and software version etc.
Control Panel
The user can operate, monitor and control the system through this control panel. He can
choose the manual or automatic model and check on/off status of all parts through it.
Menu Functions
1. File Menu
Please see below.
