Operating instruction Z7510 Multizone temperatur controller
I
Temperatur controller
43
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
08.2018
Operations manual NR4000-v.2
NOLDEN Regelsysteme GmbH
43
- Copy all parameters
The „Zone Configuration“ and
of this zone to
the following controller para-
meters (described in chapter
6.3 and programmed in this
zone) can be copied to each
other zone, if all zones have
the same kind of sensors.
We recommend to program first one zone enti-
rely, set the desired control parameters and
copy then to all other zones as needed.
Destination zone number
, to which all para-
meters will be copied.
Set with the „▲“ und „▼“ keys.
„All“ : copy to all zones.
Parameter are being copied, after the „
Enter
“
- key is pressed
While the copy function is active :
„COPY“ is shown.
