Operating instruction Z7510 Multizone temperatur controller
I
Temperatur controller
38
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
08.2018
Operations manual NR4000-v.2
38
List of all parameters with associated options :
- Zone on/off
on
Measuring- or controller
zone active (default)
off
Measuring- or controller
zone switched off
- Controller
CONTROL (without automatic
Output mode :
sensor breakage switch)
AUTOMATIC
(
factory default
)
In event of sensor break the control-
ler automatically maintains the last
valid output ratio.
MANUAL
The controller now operates only as
an actuator = manual mode.
The controll function (PID) is not
active.
If MANUAL is set or activated trough a sensor
break, the output ratio can be set manually just like
a setpoint as follows :
Press „
zone
“-key to display the desired zone
PROCESS: Error warning: Er.H or
Er.L.
MANUAL: The actual output ratio is
shown.
Factory default
(list see Chapter 6.6)
