Operating instruction Z7510 Multizone temperatur controller
I
Temperatur controller
36
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
08.2018
Operations manual NR4000-v.2
36
- Interface-protocol :
This parameter and the following ones are only shown if
the device is equipped with a serial data interface
(option). The associated settings are described in a sepa-
rate chapter (see 8.2) .
- Time-out autotuning :
5 ... 200 min
Factory default : 15;
Maximum duration for the autotuning function, after this
time is expired, autotuning is stopped and the pre-set
standard PID values are loaded.
- Back to factory
OFF,
ON
default settings:
Overwrites all device and zone-specific parameters with
the factory default settings (list see chapter 6.5).
End of this parameter level.
Back to top of list : „Synchronisation“.
