Operating instruction Z7510 Multizone temperatur controller
I
Temperatur controller
22
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
08.2018
Operations manual NR4000-v.2
22
Zone detail view - shows actual tempera-
ture, setpoint and alarms of one zone.
Zone-Nr. :
With the „ ▲“ and „▼ “ keys, adjust the setpoint
value as needed.
Altered, but not yet acknowledged values are being
marked with a flashing „E“, acknowledge with the
„
Enter
“ key.
„PROC“ : Setpoint 1 active
„PROC SP2“ : Setpoint 2 active
„MANUAL“ :
Manual powersetting active
(Manual mode)
Setpoint 2 is only adjustable in the menu „Configu-
ration level - zones“ .
Other indications :
- „OUTPUT“ (power setting) in %:
Shows the actual calculated output ratio in percent
of the installed heating capacity. It can‘t be
adjusted in this menu.
