Telescopic Shelving System
The telescopic shelves remove easily from the runner for repositioning or clean-
ing, but we recommend that you reposition your shelving before cooking, and
remove the shelving for cleaning only when the shelves are cold to prevent burn-
ing yourself.
To remove the telescopic shelves:
Make sure the shelf is cool enough to touch, or use oven gloves.
Push the oven shelf back into the cavity, until it hits the stop position.
Grasp the shelf bars in the centre, and lift the back of the shelf clear of the stop
position.
You can then lift the front of the shelf clear of the retaining tabs.
To replace the telescopic shelves:
Make sure the oven runners are pushed all the way back into the cavity.
Tilt the shelf and make sure the front of the shelf is against the stop position.
Carefully place the shelf back onto the runner and snap in place firmly.
Make sure the back of the self is inside the retaining tabs and slide it in and out
of the oven to make sure it works correctly.
Standard shelves:
Standard shelves are removed by pulling them straight out towards you and are
replaced by sliding them straight into the oven to the back of the cavity.
These shelves can be cleaned in the dishwasher.
55
1. Grasp and
lift shelf bars
2. Lift shelf
clear
Note: Make sure the shelf is
unclipped from the retaining
tabs before removal.
Make sure the shelf
is firmly pressed against
the stop position at
back of the oven cavity
08 27189 01 Ra DF 2/6/05 9:40 AM Page 59
Summary of Contents for Gourmet Professional 1100DF
