Installing Your Cooker
Stabilising and Securing
Your cooker may come with a stability chain, if it does not we recommend that
you buy a stability bracket from your local supplier, this will keep the cooker from
moving and will prevent damage to the flexible hosing at the back of the cooker.
Your stability bracket
l
You can buy a stability bracket from your supplier and it can fitted as follows:
l
Place the cooker in position and draw a pencil line level with the front edge.
l
Mark the centre of the cooker to give the centre line for the bracket.
l
Remove the cooker and mark off 450mm from the pencil line to locate the
front edge of the lower bracket.
l
Fix the bracket to the floor. Measure from floor level to engagement edge in
the back of the cooker and add 3mm.
l
Assemble the underside of the top part of the bracket to this height.
Once the cooker is stable, ensure it is level - see the previous page.
Stability bracket
1
Pencil line
on floor
2
Centre
line
3
450
mm
Front edge for
lower bracket
4
5
Underside of top bracket
slots into engagement
edge in back of cooker.
Rear wall
65
08 27189 01 Ra DF 2/6/05 9:40 AM Page 69
Summary of Contents for Gourmet Professional 1100DF
