Your Grill
The conventional grill
Important:
The door must be kept open when the grill is used.
Do not
leave the grill unattended while it is in use. Before you use the grill,
make sure you have placed the grill shelf in the position you need as once the
grill is on you may injure yourself if you try and move the shelf.
This is a dual circuit grill, which allows you to chose the half grill (for smaller
portions / quantites) and the full grill (for larger portions / quantities). Speed of
grilling can be changed by adjusting the heat setting and, by choosing a high or
low shelf setting.
While the grill is in use the both the oven and grill neons will illuminate, normally
they will not cycle on and off, unless the door is inavertantly closed - this is
because the thermostat is maintaining the temperature in the cavity.
To switch on the grill
l
Open the top oven / grill door.
l
Turn the top oven control anti-clockwise, the grill symbols (full and half), are
before the top oven temperature settings.
l
The dual grill uses all of the top element, and the single economy grill setting
uses the inner part of the element only. Heat setting for the conventional grill
are 1 (low) to 8 (high).
l
To switch off, return the control knob to the off position.
For best results, preheat for about three minutes.
25
These instructions are for the following appliances:
Richmond 1000DF &
1100DF - Top Oven
08 27189 01 Ra DF 2/6/05 9:40 AM Page 29
Summary of Contents for Gourmet Professional 1100DF
