Still 5410, Original Instructions Manual

Page: 40 / 288

NOTE
Lower or higher noise values may occur when
using industrial trucks， e.g. due to the mode
of operation, environmental factors and other
sources of noise.
Vibrations
Vibrations to which the hands and arms
are exposed
The following value is valid for all truck mod-
els:
●
Vibration characteristics < 2.5 m/s
2
NOTE
It is mandatory to specify the hand-arm vibra-
tions, even where the values do not indicate
any danger, as in this case.
CAUTION
The value expressed above can be used to compare
forklift trucks of the same category. It cannot be
used to determine the operator's daily exposure to
vibrations during real operation of the truck; these
vibrations depend on the conditions of use (floor con-
ditions, method of use etc.) and therefore daily expo-
sure must be calculated using data from the place of
use.
Wheels and tyres
DANGER
Risk to stability!
Failure to observe the following information and in-
structions can lead to a loss of stability. The truck
may tip over — risk of accident!
The following factors can lead to a loss of
stability and are therefore prohibited:
●
Wheels not approved by the manufacturer
●
Excessive wear to the tyres
●
Tyres of inferior quality
●
Changes to the wheel rims
●
Combination of wheels from different manu-
facturers
Safety
2
Basic principles for safe operation
30 5001 801 1625 EN - 05/2022 - 03