The cab and doors have large glazed areas
and allow the driver maximum all round visibil-
ity during driving and lifting operations.
Screen wiper and washers are fitted to the
front, top and rear screens with demist func-
tions as part of the cab heater or the optional
climate control system.
An optional passenger seat can be fitted in the
right rear corner of the cab.
An optional fire extinguisher can be fitted in
the cab if required.
The guard rails is the standard configuration if
the truck equipped with the ordinary glass.
Battery access
A compartment for battery access is located
on the left side of the truck, which allows you
to:
●
check the truck batteries
●
fill the windscreen washer reservoirs
General
The industrial truck described in these operat-
ing instructions conforms with the applicable
standards and safety regulations.
The industrial truck is fitted with state-of-the-
art technology. Following these operating in-
structions will allow the industrial truck to be
handled safely. By complying with the speci-
fications in these operating instructions, the
functionality and the approved features of the
industrial truck will be retained.
Get to know the technology, understand it and
use it safely - these operating instructions pro-
vide the necessary information and help to
avoid accidents and to keep the truck ready
for operation beyond the warranty period.
Therefore:
–
Before commissioning the industrial truck,
read the operating instructions and follow
the instructions.
–
Always follow all the safety information con-
tained in the operating instructions and on
the industrial truck.
Introduction
1
Your industrial truck
5
5001 801 1625 EN - 05/2022 - 03
Summary of Contents for 5410
