Engine oils of API classification CD are not
recommended for the first 50 hours of oper-
ation and for extra light duty. During engine
operation, part of the oil serving as piston lu-
bricant is burned (consumed). The products of
combustion combined with the high tempera-
tures lead to oil ‘wear’, especially of the chem-
ical additives.
Since this oil wear depends on operating con-
ditions and the quality of oil (productivity of oil)
and fuel used, oil change intervals of different
lengths result.
The longest possible oil change interval for lu-
bricating oil in engines is one year, i.e. change
oil at least once every year of operation inde-
pendent of the oil change intervals.
CAUTION
Risk of poisoning and environmental issues.
Used oil must be kept out of the reach of children
until disposed of in accordance with local authority
guidelines. Do not allow oil to get into the sewage
system or seep into the ground.
Due to the disposal problem, the required spe-
cial tools and knowledge, the engine oil and
filter change should be performed by your au-
thorised dealer.
*option
Viscosity of oil
NOTE
Variations in these characteristics may occur
with future improvements.
Oil operating temperatures
Since the viscosity of lubricants varies with
temperature, the ambient temperature at the
locality of the truck’s use is the determining
factor in selection of the viscosity range (SAE
class) of the engine oil (see diagram).
If the ambient temperature occasionally falls
below the temperature limit (e.g. using SAE 15
W/40 down to -15 °C), the cold start capability
of the engine is reduced, but no damage to
the engine will result.
0W-30
0W-40
5W-30
5W-40
5W-50
10W-30
10W-40
10W-50
10W-60
15W-30
15W-40
15W-50
20W-50
20W-60
°F
°C
+ 86
+ 77
+ 68
+ 59
+ 50
+ 41
+ 32
+ 23
+ 14
+ 5
- 4
- 13
+ 30
+ 25
+ 20
+ 15
+ 10
+ 5
0
- 5
- 10
- 15
- 20
- 25
d1411049
Maintenance
5
General maintenance
214
5001 801 1625 EN - 05/2022 - 03
Summary of Contents for 5410
