Activate the power supply:
–
Place a valid transponder on the reading
area (10) and hold it there for longer than
2 seconds
LED (5) lights up yellow and LED (6) flashes
green.
–
Turn turning knob (9) to switch setting "0"
The engine is switched off.
–
Turn turning knob (9) to switch setting "I"
The power supply remains switched on for ap-
prox. 60 seconds (e.g. for lighting).
NOTE
If another valid transponder is placed on the
reading area within 60 seconds, the engine
can be started again.
LED condition display
Function:
LED (5)
LED (6)
Standby mode
Off
Off
Input prompt: PIN/transponder
Flashes green alternately
with LED (6)
Flashes green alternately
with LED (5)
No error when reading in PIN/transpond-
er; engine can be started
Illuminates green
Illuminates green
Error when reading in PIN/transponder;
engine cannot be started
Flashes red
Flashes red
Transition to standby mode
Illuminates red once
Illuminates green once
Power supply active for 60 seconds
Lights up yellow
Flashes green
Data read-out required - memory 90%
full
Flashes red
Illuminates green
Data read-out required - memory 100%
full
Illuminates red
Illuminates green
Speed reduction via shock sensor
Flashes red slowly
Flashes green slowly
Lighting
NOTE
The arrangement of the individual switches on
the console on the upper right-hand side of
the overhead guard may vary, depending on
the version. Observe the switch symbols.
Operation
4
Optional equipment
120
5001 801 1625 EN - 05/2022 - 03
Summary of Contents for 5410
