NOTE
Condensation water in the evaporator can cre-
ate a musty smell. Switching off the air condi-
tioning ten minutes before completing the jour-
ney and keeping the blower running will dry
out the condensation water, thus preventing
the musty smell.
Normal heating and air conditioning opera-
tion:
–
Use the turning knob (14) to adjust the tem-
perature.
–
Use the turning knob (11), the turning knob
(9) and the left and right cab air nozzles to
adjust the temperature and the temperature
distribution.
NOTE
On cool, humid days, the heater and air con-
ditioning can be used to dehumidify the air
in the cab. By operating the heater and the
air conditioning simultaneously, the heater can
counteract the cooling effect. This produces a
more pleasant temperature inside the cab and
prevents misting of the windows.
Settings for maximum cooling in the cab
–
Switch on the air conditioning.
–
Turn the turning knob (14) to cold (left-hand
end position).
–
Turn the turning knob (11) to level 4.
–
Open the left and right cab air nozzles.
–
Close the windows and doors.
NOTE
A significant difference between the internal
temperature and the outside temperature in-
creases the physical stress put on the driv-
er. To reduce the risk of illness, the differ-
ence between the internal temperature and
the outside temperature must not exceed six
degrees.
Operation
4
Standard equipment
81
5001 801 1625 EN - 05/2022 - 03
Summary of Contents for 5410
