Still 5410 Original Instructions Manual Download Page 265

Page: 265 / 288

Disposal of old trucks

The disposal of old trucks is regulated in di-

rective 2000/53/EC from the European Parlia-

ment and Council.
We therefore recommend having this work

carried out in an approved recycling plant. If

you would like to carry out this work yourself,

you must obtain approval from the relevant

authorities as per articles 9, 10 and 11 of di-

rective 75/442/EEC.
In addition, the following minimum require-

ments must be observed:

●

The locations in which old trucks are stored

before treatment must be areas suited to

this task with impervious surfaces. These

areas are also to be equipped with collec-

tion devices and separators for leaking flu-

ids and degreasing cleaning materials

●

The locations for treatment must be areas

suited to this task with impervious surfa-

ces. These areas must also be equipped

with collection devices and separators for

leaking fluids and degreasing cleaning ma-

terials. Suitable storage areas must be

available for disassembled and partially oil-

smeared parts, as well as for tyres including

fire protection measures. Suitable storage

tanks for fluids such as fuel, AdBlue® (urea

solution), engine oil, hydraulic oil, cooling

fluid and fluids from air conditioning sys-

tems must also be provided

●

In order to dispose of harmful substances

from the old trucks, the batteries and LPG

container must be removed. The following

must also be removed, collected and stored

separately: fuel, AdBlue® (urea solution),

engine oil, cooling fluid, hydraulic oil and

fluids from air conditioning systems

●

The following parts are to be collected sep-

arately and recycled: catalytic converters,

metal components containing copper and

aluminium, tyres, large plastic components

(consoles, fluid containers) and glass

NOTE

The operating company is responsible for ad-

herence to the directives as well as additional

country-specific regulations.

Maintenance

Decommissioning the truck

255

5001 801 1625 EN - 05/2022 - 03

Summary of Contents for 5410

































































































































































































































































































Search results

Summary of Contents for 5410

Reviews:

Related manuals for 5410

Brands by name

Popular brands

Still 5410, Original Instructions Manual

Search results

Summary of Contents for 5410

Reviews:

Related manuals for 5410

Brands by name

Popular brands