StarTrac Elliptical Edge, Service Manual

Page: 5 / 74

Tools and Materials
The following tools and materials are required to perform adjustment and parts replacement proceudres for the Ellip-
tical Edge:
TOOUMATERIAL USED FOR
Flat head screwdriver Shuttle Adjustment
Phillips head screwdriver Communication Cable Replacement
Display Power Cable Replacement
Cable Harness Replacement
Local Control Board Replacement
Battery Replacement
Shuttle Replacement
Skate Rail Replacement
Stride Belt Replacement
Transmission Bearings Replacement
Crank Bearings replacement
5/64-in. Allen Wrench Crank Bearings Replacement
3/32-in. Allen Wrench
Display Panel Replacement
Communication Cable Replacement
Display Power Cable Replacement
Transmission Bearings Replacement
7/64-in. Allen Wrench
Crank Bearings Replacement
1/8-in. Allen Wrench
Skate Rail Replacement
Stride Belt Replacement
5/32-in. Allen Wrench Shuttle Replacement
Skate Rail Replacement
3/16-in. Allen Wrench Stride Belt Replacement
Crank Bearings Replacement
1/2-in open-end wrench Cable Harness Replacement
9/16-in. open-end wrench Transmisstion Bearings Replacement
Crank Bearings Replacement
3/16-in. socket wrench Shuttle Replacement
Skate Rail Replacement
7/16-in. socket wrench* Skate Rail Replacement
Stride Belt Replacement
1/2-in. socket wrench* Skate Rail Replacement
Stride Belt Replacement
Elliptical Edge Service Manual 1.5