StarTrac Elliptical Edge, Service Manual

Page: 20 / 74

Service Setting's·
The Elliptical Edge records and stores usage data which may be used as an aid in maintaining the unit and diag-
nosing malfunctions. The Service Settings Mode lets you view this usage data, as well as software version numbers
and the serial number and date of manufacture for the unit.
To enter the Service Settings Mode:
1. Press and hold the "Enter", "0" and "2" keys at the same time.
2. While continuing to hold the "Enter" and "0" keys, release the "2" key. The unit will beep once, and the message
"Service Settings" will show in the upper information display.
3. Release the "Enter" and "0" keys.
Once the unit is in the Service Settings Mode, use the keypad to view service settings, service messages, or system
measurements: .
The following stored data may be viewed while in the Service Settings Mode:
ITEM DESCRIPTION
Display Version Version of software currently installed in the display.
LCB Version Version of software currently installed in the Load Control Board.
Serial#
Serial number of the unit.
Manufacture Date Unit manufacture date (displayed as DDMMYY).
Workout Hours Total number of operating hours accumulated on the unit to date.
Workout Distance Total number of distance units accumulated on the machine to date. Distance units are
displayed in either miles or kilometers (depending on the "Units" selection (English or Met-
ric) chosen in "Display Settings".
Battery Hours Total number of hours the battery has been used under power (displayed in thousands of
hours). Need to reset to zero when battery replaced.
Last Keystrokes
Displays the last five keys pressed prior to a software or system failure.
3.6
Elliptical Edge Service Manual