StarTrac Elliptical Edge, Service Manual

Page: 18 / 74

Display Settings Mode
The Display Settings Mode lets you view and modify several unit settings, which affect the way the machine oper-
ates during a workout. Use the keypad to enter the Display Settings Mode, view the current settings and make any
desired changes.
To enter the Display Settings Mode:
1. Press and hold the "Enter", "0" and "1" keys at the same time.
2•. While continuing to' hold the "Enter" and "0" keys; release the "1" key. The unit will beep once, and the message
"Display Settings" will show in the upper information display.
3. Release the "Enter" and "0" keys.
Once the unit is in the Display Settings Mode, use the keypad to select and enter changes to unit settings:
KEY FUNCTION
"Scroll" Key Press the "Scroll" key to scroll through the display settings and select the setting you wish to
view or change (for each setting, the current value is displayed in the upper information win-
dow). Pressing and holding the "Scroll" key will scroll continuously through the available set-
tings.
"Up-Down Arrow" Use the "Up-Down Arrow" keys to scroll through the available values for the setting and to se-
Keys lect a new value. When a new value for the setting has been selected, press the "Scroll" key to
save the new value and advance to the next setting.
NOTE: To return display settings to their original values after changes have been made and
saved, you must MANUALL
Y
re-enter the factory-default settings.
"Enter" Key Press the "Enter" key to exit the Display Settings Mode and return to the standard operating
mode.
3.4
Elliptical Edge Service Manual