StarTrac Elliptical Edge, Service Manual

Page: 24 / 74

Troubleshooting Chart
SYMPTOM PROBABLE CAUSE SUGGESTED REMEDY
Shuttle is loose (forward and back-
1. The stride belt is worn or has 1. Adjust the stride belt tension (see
ward movement on skate rail) stretched. Stride Belt Adjustment, page 2.4)
2. Replace the stride belt (see
Stride Belt Replacement, page
5.18)
2. The clutch bearing is slipping. 1. Replace the transmission as-
sembly (see Transmission Bear-
ings Replacement, page 5.20)
2. Replace the transmission shaft
(see Transmission Bearings Re-
placement, page 5.20)
Shuttle is loose (up and down 1. The shuttle out of adjustment 1. Adjust the shuttle's eccentric roll-
movement or sideplay on skate ers (see Shuttle Adjustment,
rail) page 2.3)
2. The shuttle rollers are worn 1. Adjust the shuttle's eccentric roll-
ers (see Shuttle Adjustment,
page 2.3)
2. Replace the shuttle (see Shuttle
Replacement, page 5.13)
Front of skate rail falls rapidly with 1. The crank belt is loose or worn. 1. Re-tension the crank belt as
little or no resistance needed (see Crank Belt Adjust-
ment, page 2.5)
2. Replace the crank belt (NO
PROCEDURE RECEIVED FOR
CRANK BELT REPLACEMENT)
2. The alternator belt is loose or
1. Retension the alternator belt as
worn. needed (NO PROCEDURE
RECEIVED FOR ALTERNATOR
BELT RETENSIONING)
2. Replace the alternator belt (NO
PROCEDURE RECEIVED FOR
ALTERNATOR BELT RE-
PLACEMENT)
4.2
Elliptical Edge Service Manual