SRT Thuraya Operating Instructions Manual Download Page 73

Page: 73 / 73

Number

Short Name

Remedial solutions by SRT

516

PDP temporarily

unavailable

Network access temporarily unavailable.

Please wait for the terminal to reacquire a connection within 3 to 5

minutes.

If the problem persists, contact your Service Provider.

517

General PDP failure

Network connection failure due to unknown cause.

If the problem persists, please contact your Service Provider.

601

Invalid position

Network service is not available due to invalid GPS position.

Verify the ADU has a clear sky view in the direction of the satellite.

If the problem persists, contact your Service Provider.

602

Invalid position for

beam

Registration is delayed or a handover is in progress.

Please wait for the terminal to reregister within 1 to 3 minutes.

If the problem persists, contact your Service Provider.

603

Lack of resources

Network connection failure due to insufficient resources.

If the problem persists, please contact your Service Provider.

604

Wait for streaming

channel

Network connection delayed due to resource requirement.

Please wait 1 minute for resource allocation.

605

Non availability of ser-

vice

Network service is not available.

Please contact your Service Provider.

606

QOS not satisfied

Quality of service requested cannot be satisfied at this time.

Please try again later, or configure a lower bit rate or best effort ser-

vice.

607

Access barred

The service option is not available in the current spot beam.

The BDU will attempt to find a more suitable signal automatically.

If this message persists, contact your Service Provider.

Table 23: Error Codes

6. Troubleshooting

Summary of Contents for Thuraya










































































Search results

Summary of Contents for Thuraya

Reviews:

Related manuals for Thuraya

Brands by name

Popular brands

SRT Thuraya, Operating Instructions Manual

Search results

Summary of Contents for Thuraya

Reviews:

Related manuals for Thuraya

Brands by name

Popular brands