10
Remote Cable and Housing Removal - RTR Only
R o c k S h o x ® S u s p e n s i o n S e r v i c e
We recommend that you have your RockShox suspension serviced by a qualified bicycle mechanic. Servicing RockShox suspension requires
knowledge of suspension components, as well as the use of specialized tools and lubricants/oils.
Visit
www.sram.com/service
for the latest RockShox Spare Parts catalog and technical information. For order information, please contact your local
SRAM® distributor or dealer.
For recycling and environmental compliance information, please visit
www.sram.com
.
Information contained in this publication is subject to change at any time without prior notice. Your product's appearance may differ from the pictures
contained in this publication.
R e m o t e C a b l e a n d H o u s i n g R e m o v a l - R T R O n l y
Prior to servicing the rear shock, remove the remote cable and housing from the shock, then remove the shock from the bicycle frame according to
the bicycle manufacturer's instructions. Replace the cable and housing after performing shock service (see the
Remote Cable and Housing Installation - RLR Only
section).
P a r t s , T o o l s , a n d S u p p l i e s
Safety and Protection Supplies
• Safety glasses
• Nitrile gloves
Common Tools
• Cable and housing cutters
• Hex wrenches: 2 mm, 3 mm
R e m o t e C a b l e a n d H o u s i n g R e m o v a l
Remove the cable spool cap.
Loosen the cable set screw, then cut the cable.
Loosen the ferrule lock screw. Remove the threaded ferrule, housing,
and cable from the cable bracket.
Discard the threaded ferrule, cable, and housing.
1
3 mm
2 mm
Cable and housing cutters
2
2 mm
