23
Bottomless Tuning
B o t t o m l e s s T u n i n g
Bottomless Tokens™ and Gnar Dog™ Tokens reduce air volume in your
rear shock and create greater progression at the end of the shock's
travel. Add or remove tokens to tune your shock's bottomless feel.
Gnar Dog Tokens are equivalent to 2.5 Bottomless Tokens.
Bottomless Tokens 3 Tokens Max
Gnar Dog Tokens
1 Gnar Dog Token + 2 Bottomless Tokens Max
Bottomless Tokens:
Clamp the shaft eyelet into the vise.
Move the bottom out washer and o-ring away from the shaft eyelet,
then snap the token onto the damper shaft with the tabbed side facing
the air valve. Slide the token down the damper shaft until it contacts
the other tokens or the eyelet. Slide the bottom out washer and o-ring
onto the tokens.
Install up to three Bottomless Tokens.
Gnar Dog Token:
Clamp the shaft eyelet into the vise.
Remove any existing tokens from the eyelet. Move the bottom out
washer and o-ring away from the shaft eyelet, then snap the Gnar Dog
Token onto the damper shaft with the flat side facing out of the eyelet.
Slide the token down the damper shaft until it contacts the eyelet.
Only one Gnar Dog Token may be installed. If one Gnar Dog Token
is installed, a maximum of two additional Bottomless Tokens can be
installed. Slide the bottom out washer and o-ring onto the tokens.
NOTICE
The Gnar Dog Token must be the first token installed into the eyelet.
Any additional Bottomless Tokens must be installed after the Gnar Dog
Token is installed.
Token Removal:
Clamp the shaft eyelet into the vise.
Move the bottom out washer and o-ring away from the shaft eyelet.
Use a pick to separate the token from the other tokens or the shaft
eyelet, then remove the token from the shaft.
NOTICE
Do not scratch the damper shaft, shaft eyelet, or the eyelet o-ring.
Scratches can cause leaks.
Bottomless Tokens
Gnar Dog Tokens
Bottomtless Tokens
Bottomless Tokens
Gnar Dog Tokens
Gnar Dog Tokens
Pick
