Get Started
3
Insert the battery, contacts end first, and gently press the battery into place.
Replace the battery compartment cover, making sure all the tabs are secure and
there are no gaps around the cover.
2. Charge your battery.
Plug the USB connector into the charger/accessory jack on the lower side of your
device.
Plug the AC adapter into an electrical outlet. Fully charging a battery may take up to
three hours.
Note:
Your device’s battery should have enough charge for the device to turn on and find a
signal, run the setup application, set up voicemail, and make a call. You should fully
charge the battery as soon as possible.
3. Press and hold the
Power
button to turn the device on.
If your device is activated, it will turn on, search for Sprint service, and begin the
setup application.
