Customer service 1-888-707-1880
Dyaco Canada Inc 2018
Email: [email protected]
15
T
esting
B
ike
Use this checklist to perform the bike test procedure.
Recheck all the bolts and make sure they are all tightened to the proper torque
specification (if indicated) and no parts are missing.
Test the seat post to make sure it move freely and you are able to lock in at different
positions.
Check the seat to make sure it is level and tight and does not rotate around or tilt. Tighten
and adjust as needed.
Test the seat horizontal adjustment for movement front to rear and check it by settings it at
different settings.
Adjust seat post to your needs. Ride / test the bike for proper operation according to this
owner's manual.
CAUTION
: The flywheel will continue to rotate and the crank arms and pedals will rotate
with the flywheel. Pressing down on the red handle will apply the brake if you need to stop
quickly.
Adjust seat post and handlebar post to your needs. Ride / test the bike for proper
operation according to this owner's manual.
Pedal the bike at a moderate pace and test for proper and smooth resistance changes
while varying the amount of turns on the resistance knob.
When the testing is complete tip the bike forward using the handlebars and roll it on a
smooth surface to the final location and adjust the leveling feet, so the bike is stable.
