Customer service 1-888-707-1880
Dyaco Canada Inc 2018
Email: [email protected]
40
Daily Maintenance
The life of your product will be determined by how consistently you perform the daily maintenance procedures. Dry the
Johnny G bike after each use to remove sweat and moisture. It is best to use a liquid non-abrasive cleaner diluted with water.
Wipe Down / Cleaning
To prevent the build-up of rust and other forms of corrosion, wipe down the bike at the end of each day (or preferably at the
end of each class). Raise all posts to the highest setting to expose moisture. Using an absorbent cloth, focus on all areas
that perspiration can settle. Give particular attention to the following areas:
Handlebar
o Seat / adjustable slide for the seat
o Flywheel
o Back leg assembly
o Chain guard
o Brake knob and bolt assembly
o Pop-pins
o Leveling feet
NOTE:
Never use abrasive cleaning liquids or petroleum-based solvents when wiping down the bike.
Inspection / Adjustment
Inspect major moving parts that require constant proper torque. Loose or misadjusted parts can result in personal injury or
damage to the bike. Check the following parts for security and/or proper torque.
Pedals
Verify that the pedals are re-torqued after the first 10 hours of use and every 100 hours of operation, thereafter. Use a torque
wrench if components are loose.
NOTE:
The pedal to the crank arm bolt torque is: 30 - 35 lb-ft.
IMPORTANT:
It is not recommended that members change out the pedals on the bike.
Weekly Maintenance
Weekly maintenance should focus on the overall performance of your Johnny G Spirit Bike. During these inspections, look
for vibration and possible loose assemblies.
Have an experienced rider ride each bike to identify and help diagnose any vibration, noises, and any "unusual" feeling from
the drive belt. Either faulty flywheel alignment or a loose belt can cause vibration.
Check for proper flywheel alignment. If flywheel requires adjustment refer maintenance to a properly trained service
tech.
Inspect each bike for loose assemblies, parts, bolts and nuts. Give particular attention to the following:
Tighten all frame base hardware.
Tighten all pop-pin handles.
Tighten seat hardware.
Tighten pedal toe clip / toe straps.
