Customer service 1-888-707-1880
Dyaco Canada Inc 2018
Email: [email protected]
21
Heart Rate
If user is wearing a heart rate strap, display will show
HEART RATE DEVICE FOUND.
-
PAIR YES will flash.
-
Press + or – KEY to toggle between PAIR YES and PAIR NO.
-
If PAIR YES
, press PLAY KEY
The number of sensors displays
Press PLAY KEY to accept or press + KEY to display next strap detected, ANT+ or Bluetooth.
After selecting strap press PLAY KEY to connect heart rate strap to console.
FOR EXAMPLE:
-
2 SENSORS FOUND. Press + or - KEY if device shown is not your own.
MYZONE-12345678 (SN# or your MYZONE device displays)
NOTE:
User will need to be familiar with SN # of their MYZONE module, located on backside of module.
ANT+ 12345 (id # for your ANT+ device displays)
NOTE:
Along with each device displayed is number indicating the distance each device is from the console. The number is in
decibels and may display as 65DB. Usually the smaller number is your chest strap but not always. If another rider is wearing a
chest strap in front of you, their device may be closer to your console than you are.
-
Press PLAY KEY and screen displays WARM UP, blinking 3 times, then reverting to WARM UP Mode. Heart Rate
displays in lower section of console.
-
If PAIR NO
, press PLAY KEY
If not wanting to connect a heart rate strap, press + KEY until screen displays PAIR NO or DO NOT CONNECT
Press PLAY KEY and screen displays WARM UP, blinking 3 times, then reverting to WARM UP Mode. The HR
on lower display will remain blank.
-
After 40 seconds WARM UP Mode recycles and flashes 3 times, then continuing with Home screen.
-
Press PLAY KEY when ready to go.
