Customer service 1-888-707-1880
Dyaco Canada Inc 2018
Email: [email protected]
34
BRAKE TEST
BRAKE TEST CONTROLS A SENSITIVE SETTING FOR YOUR BIKES FUNCTIONALITY. PROPER TRAINING IS
REQUIRED FOR THIS SETTING.
-
Purpose of this setting is to test the magnetic resistance system.
Press PLAY KEY to enter BRAKE TEST.
MOTOR TEST AUTO
is displayed.
o
Press + KEY or - KEY to switch to MOTOR MANUAL and LIMIT SENSOR and EXIT.
Press PLAY KEY.
LEVEL TO 20 displays, Press PLAY KEY.
o
Auto-run motor in a look from L-1 to L-20 and back to L-1.
o
Press PLAY KEY to end, revert to BRAKE TEST.
MOTOR TEST MANUAL.
Use + KEY and – KEY to move motor.
Press PLAY KEY to end, revert to BRAKE TEST.
o
ENCODER displays. This is ENCODER count or digital value.
o
Upper Right of display displays LIMIT SENSOR CONDITION.
1 = HOME
2 = ACTIVE RANGE
3 = END
o
Lower display displays Encoder Set Value.
LIMIT SENSOR
S1 ON, S2 OFF
S1 is Home Position
S2 is End Point
EXIT
will revert to setting screen.
Press + KEY for next screen or RESET CONSOLE to exit MAINTENANCE MODE.
RPM SENSOR TEST
RPM SENSOR CONTROLS A SENSITIVE SETTING FOR YOUR BIKES FUNCTIONALITY. PROPER TRAINING IS
REQUIRED FOR THIS SETTING.
-
Purpose of this setting is to test the functionality of the RPM detection system.
Press PLAY KEY to enter RPM SENSOR TEST.
o
REED ON RPM displays ON or OFF.
o
When REED Switch is Closed, displays ON.
o
When REED Switch is Open, displays OFF.
o
RPM displays Pedal RPM.
Press PLAY KEY to exit to setting screen.
Press + KEY for next screen or RESET CONSOLE to exit MAINTENANCE MODE.
