Customer service 1-888-707-1880
Dyaco Canada Inc 2018
Email: [email protected]
10
STEP 1:
ASSEMBLY OF STABILIZERS AND PEDALS
1. Assemble FRONT STABILIZER (2) to MAIN FRAME (1) using THREE HEX BOLTS (165)
and three WASHERS (166) with19MM WRENCH (167).
2. Assemble REAR STABILIZER (3) to MAIN FRAME (1) using 2 SHORT HEX BOLTS (165),
1 LONG HEX BOLT (141), 1 WASHER (125) and 2 WASHERS (166) with 19MM
WRENCH (167). The LONG HEX BOLT (141) and WASHER (125) are used in the center
hole and tightened with 17MM ALLEN WRENCH (157).
3. Assemble PEDALS (54) to bike using 15MM WRENCH (158). If using torque wrench,
tighten to 30-35 lbf•ft.
PART
TYPE
DESCRIPTION
QTY
165
Short Hex Head Bolt
M12×1.25×20L
5
141
Long Hex Head Bolt
M10×P1.5×55L
1
166
Flat Washer
Ø12.7 × Ø26 × 2T
5
125
Flat Washer
Ø10×Ø25×1.5T
1
54
Pedals Set
Pedals L/R
1
HARDWARE FOR STEP 1
