Customer service 1-888-707-1880
Dyaco Canada Inc 2018
Email: [email protected]
9
ASSEMBLY & SETUP
1. Position the shipping carton so the Heavy End is located at the bottom.
2. Cut the straps then lift the box over the unit and unpack. Remove all parts from the
shipping carton and foam inserts, and verify that all parts are included in your shipment:
3. Locate the hardware package. Remove the tools first. Remove the hardware for each step
as needed to avoid confusion. The numbers in the instructions that are in parenthesis (#)
are the item number from the assembly drawing for reference.
NOTE:
All tools required to assemble the bike are included within the packaging, except for a
Rubber Mallet, which is recommended when assembling the pedals onto the bike.
CAUTION:
Damage to the bike during assembly is not covered as part of the limited Spirit
Fitness warranty. Take care not to drop or lean the bike on its side. Carefully stand the bike
up in the normal upright position on a stable surface so it will not tip over during assembly.
Protect the environment by not disposing of this product with household waste. Check your
local authority or approved waste center for recycling advice and facilities
.
TOOLS NEEDED:
#155. L M4 Allen Wrench (1 pc)
#157. 17mm Wrench (1 pc)
#158. 13/15 Wrench (1 pc)
#159. L M2.5 Allen Wrench (1 pc)
#167. 19mm Wrench (1 pc)
