Spike Systems PBG Series, System Manual

Page: 13 / 94

Spike Systems: PBG System Family Installation
5
1.5.1 PBG System Family Parts Identification and Shipping Contents
Figure 2 – PBG Product Family Major Component Identification
Shipped Components Not Pictured
•
Clevises and associated attachment hardware for hydraulic cylinders. Two
hydraulic cylinders, one each are pre-­‐installed to mounted clevis hardware
on the inside of the Control Cabinet and one to the clevis on the inside of
the Non-­‐Control Cabinet. The lower ends of hydraulic cylinders are to be
attached to welded clevis assemblies on the Plate Barrier
•
Two rubber hydraulic hoses, rolled and stored in the Control Cabinet
•
Standard and optional safety signs
•
Pre-­‐turned wires for Inductive Control Loops and electronic unit to be
installed on TB-­‐1 within Control Cabinet
•
Traffic Control lighting and associated installation equipment
•
Lower-­‐cost traffic barrier assembly (option)