Spike Systems PBG Series, System Manual

Page: 42 / 94

Spike Systems: PBG System Family Installation
34
Figure 35 – Adjust Cabinet Locations to Ensure ½ ” Gap between Plate and Cabinets
3.2.2 Anchor Bolt Installation
Spike PBG systems are anchored to the ground with Hilti 4” x 5/8” concrete anchors as shown in
Figure 49. Use a 5/8” masonry drill bit to pilot holes for the anchors at least 4 inches deep.
Remove all dust and debris with an air compressor and ensure that the pilot holes are as clean
as possible.
Figure 36 – Hilti Concrete Anchor Bolt (4” x 5/8”)