Spike Systems PBG Series, System Manual, Page: 48 / 94

Spike Systems: PBG System Family Installation
40
WARNING -­‐-­‐ When servicing the system, this switch should be placed in the OFF position
and the power going to the junction box should be shut off at the breaker box. When AC
power is OFF at this switch and breaker box, voltages may still be present within the Spike
System Control Box. Use caution.
Figure 44 – AC Power Junction Box Inside Control Cabinet
Tool Required Tool Type Tool Specification
Flexible Conduit To connect power
conduit stub-­‐up to 4
gang box
Conduit Fitting To connect flexible
conduit to client-­‐
installed rigid conduit
Flat Blade Screw
Driver To open junction box
and terminate power
cables
Wire Strippers To make electrical
connection (Licensed
contractor)
The figure below shows a typical routing of the flexible conduit that will provide power to
the PBG system. A locally licensed electrical contractor should perform electrical power
connection to the Spike System.