Spike Systems PBG Series, System Manual

Page: 33 / 94

Spike Systems: PBG System Family Installation
25
2.8.2 Position the Non-­‐Control Cabinet Close to the Plate Barrier
Place the Non-­‐Control Cabinet near the plate, leaving a foot or two of distance initially.
Tool Required Tool Type Tool Specification
Forklift for unit
placement If a forklift is not
available, use
sufficient labor to lift
and place the Control
Cabinet in position
Figure 22 -- Locate Non-Control Cabinet near the Plate and Hinge for Installation
Place the Non-­‐Control Cabinet in approximate location across from the Control Cabinet. Do NOT
permanently anchor the Non-­‐Control Cabinet at this time because its position will need to be
adjusted when the Barrier Gate is installed.