Spike Systems PBG Series, System Manual

Page: 10 / 94

Spike Systems: PBG System Family Installation
2
1.2 Product Model Numbers
The PBG-­‐100/120/140 and /160 are available with clear widths of 10, 12, 14, and 16 feet,
respectively, as shown in the table below.
Model Number
Guide
Spike PBG
System
Orientation Buttress
Options
Clear
Width
PBG-­‐100 RH or LH SB or DB 10’
PBG-­‐120 RH or LH DB 12’
PBG-­‐140 RH or LH DB 14’
PBG-­‐160 RH or LH DB 16’
Legend
RH Right Handed (placement of Control Cabinet as you drive toward the PBG system.)
LH Left Handed (placement of Control Cabinet as you drive toward the PBG system.)
SB Single Buttress (One or two Control Cabinets and no Non-­‐Control Cabinet). The
PBG-­‐100 can be configured with a Control Cabinet on the right or left side, with NO
Non-­‐Control Cabinet. Also, two PBG-­‐100 systems can be combined with a Control
Cabinet on each side (and no Non-­‐Control Cabinets) for a total Clear Width of 20’.
When this configuration is used, there can be up to a four-­‐foot gap between
systems for a total Clear Width of 24’.
DB Double Buttress (One Control Cabinet, one Non-­‐Control Cabinet).
1.3 Product Family Description and Specifications
The PBG family is an automated hydraulic Plate Barrier Gate that is surface mounted. The
product line is designed primarily to prevent against unauthorized vehicles from either
entering or exiting a secured control point. Using hydraulic and solid state components,
and with it’s customizable control logic, it can easily be adapted to variety of uses, for
example, revenue control, rental car agency, security checkpoints, and others.