SpectraLink IP-DECT 200 Installation And Configuration Manual Download Page 377

Page: 377 / 456

14215700-IG, Edition 15.0
May 2020, Original document

377

Field

Require encryption (Optional)

If enabled, the connection between the base station and
the Spectralink IP-DECT/Virtual IP-DECT Server is
required to be encrypted.

Note

: Enabling this, will only allow base stations with firm-

ware PCS 17Fa or newer to connect.

Default value: Disabled

If not enabled, the connection will be encrypted if the base
station supports encryption.

Media encryption (SRTP) (Optional)

If enabled, secure RTP for base station audio connections
is used.

Default value: Disabled

Note

: If not running PCS 20A_ or newer, this field is only

visible if a Security (TLS, SRTP) License is loaded.

RFP port range start

Port range start for RFP local RTP ports.

Default value: 57000

Note

: It is possible to change the value in case of con-

flicting ports.

Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide

Summary of Contents for IP-DECT 200









































































































































































































































































































































































































































































Search results

Summary of Contents for IP-DECT 200

Reviews:

Related manuals for IP-DECT 200

Brands by name

Popular brands

SpectraLink IP-DECT 200, Installation And Configuration Manual

Search results

Summary of Contents for IP-DECT 200

Reviews:

Related manuals for IP-DECT 200

Brands by name

Popular brands