SpectraLink IP-DECT 200 Installation And Configuration Manual Download Page 331

Page: 331 / 456

14215700-IG, Edition 15.0
May 2020, Original document

331

On the

Device

profile, notice the

Username / Extension

link. If the handset is linked to a specific

user, the text field will hold the extension number of that user and the

Username / Extension

link is

active.

Clicking on

Username / Extension

the link will take you to the

User

profile of the linked handset.

And when clicking on the

IPEI

link from the

User

profile, that will take you to the

Device

profile of the

linked handset.

Note:

If the user is not linked to a handset, this

Username / Extension

link is inactive and there

is no extension number in the associated text field.

For examples of handset sharing, see

"Handset Sharing Setup Examples" on page 333

Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide

Summary of Contents for IP-DECT 200









































































































































































































































































































































































































































































Search results

Summary of Contents for IP-DECT 200

Reviews:

Related manuals for IP-DECT 200

Brands by name

Popular brands

SpectraLink IP-DECT 200, Installation And Configuration Manual

Search results

Summary of Contents for IP-DECT 200

Reviews:

Related manuals for IP-DECT 200

Brands by name

Popular brands