SpectraLink IP-DECT 200 Installation And Configuration Manual Download Page 146

Page: 146 / 456

14215700-IG, Edition 15.0
May 2020, Original document

146

Field

Wireless Server Configuration - DECT

Subscription allowed (Optional)

If enabled, it is possible to subscribe new handsets to
the system.

Note

: Subscription will be disallowed after 120

seconds or when a subscription succeeds. If more
time is needed or more handsets must be subscribed,
it is necessary to disable the parameter

Auto-

matically disable subscription allowed

below.

Automatically disable subscription
allowed (Optional)

If enabled, subscriptions will automatically be dis-
allowed after 120 seconds or when a subscription suc-
ceeds.

If disabled, subscriptions will be allowed until explicitly
disabled.

Default value: Enabled

Note

: This feature is part of DECT Security Step A.

Authenticate calls (Optional)

If enabled, each individual DECT call will be authen-
ticated.

Encrypt voice/data (Optional)

Encryption of voice/data packets transmitted via
DECT.

Possible values:

Disabled

Enabled

Required

Default value: Required

Note

: Repeaters do not support encryption. If set to

Required

, the call is ended when handover is estab-

lished on the repeater.

Early encryption and re-keying
(Optional)

If enabled, this enables encryption immediately after
connection establishment and regular re-keying until
connection termination.

Possible values:

Disabled

Enabled

Required

Default value: Disabled

Note

: Enabling early encryption may increase con-

nectivity problems in areas with poor coverage.

Note

: Only Spectralink Handsets with firmware PCS

18Da or newer support

Required

Note

: This feature is part of DECT Security Step A.

Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide

Summary of Contents for IP-DECT 200









































































































































































































































































































































































































































































Search results

Summary of Contents for IP-DECT 200

Reviews:

Related manuals for IP-DECT 200

Brands by name

Popular brands

SpectraLink IP-DECT 200, Installation And Configuration Manual

Search results

Summary of Contents for IP-DECT 200

Reviews:

Related manuals for IP-DECT 200

Brands by name

Popular brands